Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4
Procedure for ARIA installation with sliding arm inwards
4.1 FASTENING ARIA WITH SLIDING ARM (01FE0056)
1 - Check the wall is straight and smooth.
2 - Drill, respecting the measurements indicated in Fig. A.
3 - Insert the plugs (supplied) or thread M8.
4 - In a stable manner fasten the automation to the wall tightening the M8 screws.
Fasten the sliding guide on the door as indicated in the figures, respecting the measurements indicated and cutting the excess part of the guide if the door is narrow.
= Hole Ø6.5 and thread to fasten with the M8 screws - Hole Ø14 if fastening with Fischer plugs.
Fig. A
14 mm FROM DOOR HINGE
14 mm FROM DOOR HINGE
X* = STANDARD + 01FE0054 (73 mm)
Electrical cables input
Electrical cables input
X*
X* = 47mm (STANDARD)
X* = STANDARD + 01FE0054 (102 mm)
2
1
7
Capítulos
Tabla de contenido
