Sel Menu - myone ARIA Manual De Instalación Y Mantenimiento

SDLY Overlapped synchronised door delay
INK Interlocked doors.
Interlocking of two automation units via the bus
connection

8.6 SEL MENU

ID Description
MODE
Operating mode
SECL Selector safety level
DLAY
Maintenance time of the unidirectional opening mode
during night stop
SAM1
If in the SIO1/SIO2 menu, the item SAM is selected,
you can choose which operating mode to set when
the contact (SIO1/SIO2) is HIGH
SAM2
If in the SIO1/SIO2 menu, the item SAM is selected,
you can choose which operating mode to set when
the contact (SIO1/SIO2) is LOW
RPEN Enable remote programmer mode
CODE Code management (from keypad or from NFC tags)
CIN
Import codes
COUT
Export codes
SHOW Display of possible anomalies and operating informa-
tion on the display
20
NO No delay
MIN Minimum delay
MED Medium delay
MAX Maximum delay
NO No active interlock
EXT External side automation
INT Internal side automation
Valeurs Notes
NO No mode selected
1DPA Monodirezionale parziale
PA Parziale
1D Monodirezionale
CLOS Porta chiusa
AUTO Modalità automatica/giorno
OPEN Porta aperta
NO/CODE RPEN set to YES allows you to activate the remote programmer
mode, or if set to NO it does not allow you to enable the remote
programmer mode.
1 sec - 5 min The night stop procedure (night mode) includes passage using
the unidirectional mode, held for the time specified in DLAY, to
allow the exit, but not entrance
CLOS Door closed
1D Unidirectional
PA Partial
1DPA Partial unidirectional
OPEN Door open
AUTO Automatic/day mode
CLOS Door closed
1D Unidirectional
PA Partial
1DPA Partial unidirectional
OPEN Door open
AUTO Automatic/day mode
NO/YES RPEN set to YES allows you to activate the remote programmer
mode, or if set to NO it does not allow you to enable the remote
programmer mode.
NO No push
DPRG Deletion of the remote programmer mode enabling codes only
DALL Complete deletion of the code list
DELC Code deletion
PROG New code saving for remote programmer mode activation
OPEN New priority open command code saving
SEL New code saving for selector unlocking (function selector mode)
NO/YES It allows you to import the code list stored on a USB flash drive
*(NOMS) *If the word NOMS appears, the USB flash drive is not detected or
is absent
NO/YES It allows you to export the code list on a USB flash drive
*(NOMS) *If the word NOMS appears, the USB flash drive is not detected
or is absent
ALL Display of active contacts of the terminal boards + warning
WARN Warning only