myone ARIA Manual De Instalación Y Mantenimiento página 19

MOT Motor configuration disabled
SIO1
Setting input/output IO1
SIO2 Setting input/output SIO2
SI3
Setting input SI3
SIGN Warnings
Activation of output contact SIO1/SIO2 (SIO1/SIO2
set on SIGN)
TAKO Automatic closure time in the event of Key Open (KO)
input enabling
SYNC Doors synchronised.
Synchronisation of up to 2 automation units via the
bus connection
OC Windings open - Manual opening with little friction
Short-circuited motor windings
Manual opening of the door with greater resistance
NO Disabled
INKE Interlock exclusion contact
KOPT Partial Key Open. Priority partial open command
WARN Alarm status signalling
SERV Number of manoeuvres reached for maintenance signalling
SIGN Warning. Select the type of signal using the SIGN parameter
BELL Buzzer activation in input/activation of door
RSET Automation reset contact
EMER Emergency open contact (NC)
SAM Select operating mode from signal level SIO1
STEP Step-step opening (open impulse/lose impulse). During opening
by steps, automatic closure is disabled.
KO Key Open Contact (priority Open command)
VOPN Virtual open contact
KC Key Close Contact (priority Close command)
NO Disabled
INKE Interlock exclusion contact
KOPT Partial Key Open. Priority partial open command
WARN Alarm status signalling
SERV Number of manoeuvres reached for maintenance signalling
SIGN Warning. Select the type of signal using the SIGN parameter
BELL Buzzer activation in input/activation of door
RSET Automation reset contact
EMER Emergency open contact (NC)
SAM Select operating mode from signal level SIO1
STEP Step-step opening (open impulse/lose impulse). During opening
by steps, automatic closure is disabled.
KO Key Open Contact (priority Open command)
VOPN Virtual open contact
KC Key Close Contact (priority Close command)
Same input See SIO1 limited to input functions: RSET, EMER, KO, VOPN,
functions as SIO1 KC, STEP, STOP, SAM.
CLOS Closed door warning
INK Door closed signal due to interlocking
LAMP Flashing/light (door in motion)
AIR Air knife
OPEN Open door warning
NO Closure time equal to TAC (Automatic closure time)
1 - 30 Differentiated automatic closure time [s]
NO No synchronisation active
SLV2 Unit 2 synchronisation slave
MST2 Unit 2 synchronisation master
SLV1 Unit 1 synchronisation slave
MST1 Unit 1 synchronisation master
19