Manual Operation; Operation Mode - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

Mowing with Edge /
Left arrow
Settings
6.3.

Manual Operation

Manual Operation is used when you want to manually send the unit to mow your lawn, regardless the Automatic
Operation's schedule.
To initiate Manual Operation, while the unit is at the Base Station, press one of the buttons (except the STOP button)
to show the display.
If the battery is fully charged and the Automatic Operation is enabled (see Section 7.3), then the start time of the next
operation is displayed, otherwise the current day and time are displayed.
Once the display is shown, choose the operation mode you want as provided in the table below:

Operation Mode

Mowing with Edge –
Mowing the edge before starting
to mow the inner area.
It is recommended to use this
mode once or twice a week,
depending on how fast the grass
is growing.
Mowing without Edge –
Mowing only the inner area
without the edge.
It is recommended to use this
mode only in the first operation
of each Mowing Cycle.
Note – if a Sub-Zone is defined, L1 (Main Zone) will be displayed when you choose an operating mode. Use the arrow
buttons to scroll and choose the required zone to be mowed and press OK.
Stop (during operation) /
Back while in the menu
Child Lock is Off
Press the 'Edge before mowing'
(left arrow) button once
Press the 'Mowing' (right arrow)
button once
Mowing without Edge /
Right arrow
GO to
Base (Home)
Child Lock is On
Press the 'Edge before mowing' (left
arrow) button then press OK
Press the 'Mowing' (right arrow)
button then press OK