Initial Setup; Getting Ready - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

4.

Initial Setup

4.1. Preparations
Recommendations before you start:
During setup, you will insert pegs into the ground. To
complete this task smoothly, we recommend not to do it
while the grass is high and to water it before starting.
4.1.1.

Getting Ready

Make sure all parts needed for setup are within reach. Have
the unit box nearby, so all items are available.
In addition, you will need the following tools: A hammer,
small flat screwdriver, Phillips screwdriver, Combination
Pliers.
4.1.2. Installing the Power Box
Mount the metal bracket onto a vertical surface with the
provided screws. Make sure the narrow part with the holes
facing up as shown in the figure to the right.
Place the Power Box above the metal bracket and slide it
•
into place along the vertical surface.
Connect the Power Box to a regular power outlet (230V / 120V).
•
4.1.3. Charging the battery before the first operation
You can charge the unit battery while running the setup of
the Perimeter Wire. This will ensure that the unit will be
ready for operation when the setup is completed.
The power of the mower is switched off when shipped
•
from the factory. Switch on the Safety Switch to power
on the mower.
Connect the DC Cable coming from the Power Box to the
•
Charging Socket at the rear side of the unit.
Confirm the Battery LED on the unit is blinking, which is
•
an indication of charging.
Leave the unit connected to the Power Box while
•
completing the setup of the Perimeter Wire.
4.2. Perimeter Wire Setup
Before you start the setup, you should have a plan for the Perimeter Wire layout and for the location of the Base Station.
Your plan should consider the following:
What type of lawn areas does your lawn have?
o
(Main Zone Only / Main + Sub-Zones / Separated Zones / combination of types).
Are there protected or excluded areas on the lawn? (Perimeter Islands).
o
Are there any slopes that the unit should avoid?
o
Are there edges of pools, ponds, and cliffs etc., which need an extra distance from the Perimeter Wire?
o
Hammer
Small flat and Phillips
Screwdrivers
Safety Switch
Combination Pliers