Maintenance Of The Blade - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

IMPORTANT! Do not place the unit upside down.
Instead, lean the mower against a surface to gain access
to the mowing deck area.
IMPORTANT! NEVER use a water hose or any type of
liquid to clean the underside of the unit. Liquids can
damage components.
Use only damp or wet cloth to wipe the surface clean after
scraping.
11.5.

Maintenance of the Blade

Examine the cutting blade for damage periodically.
•
Use only a sharp blade. Replace any damaged blade.
•
Replace the blade once a year between seasons.
•
CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE
SERVICING BLADE!
IMPORTANT! After turning off the Safety Switch always reset
the current day and time. Failure to do so may result in non-
intentional operation of the unit.
IMPORTANT! Sharpening is not allowed, since it may create
unbalance.
To remove the blade:
Insert the clamp side of the Blade Removal Tool into the
open slits beside the locking tabs on either side of the
blade.
Turn the Blade Removal Tool slightly so that the clamp
resides on top of the locking tabs on either side.
Squeeze the handle of the Blade Removal Tool. The
locking tabs on each side of the blade will be pressed
(1).
Pull the blade assembly off, away from the mower (2)
When reinstalling the blade, line up the mating splines
and push until a firm click is heard, indicating a proper
seating of the blade onto the shaft.
Safety Switch