Advanced Settings - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

Only one window of Inactive Hours can be set in the Basic Settings. To open an additional window of Inactive
•
Hours use Robomow® App.
6.4.1.4. Area – Update the size of the lawn in case it has been changed.
Press the 'Setting' button 4 times until the Area icon is blinking.
•
Scroll to change the area and press 'OK' to confirm.
•
If more than one zone is defined, then first scroll to select the zone you want to edit and set the area for that
•
zone as described above.
Names of zones are as follows:
L1 – Main Zone
L2 – Separated Zone A
L3 – Separated Zone B
A1 – Sub-Zone 1
A2 – Sub-Zone 2
A3 – Sub-Zone 3
A4 – Sub-Zone 4
6.4.2.

Advanced Settings

The Advanced Settings are additional menu options that are not changed very often and thus are not included in the
Basic Settings.
To change any option/feature in the Advanced Settings, press the 'Settings' button continuously for 3 Sec.
•
'P001' is displayed. Use the arrows to scroll to the setting you want to change, and then press OK.
•
Use the arrow button to change the setting and press OK to confirm.
•
Scroll to change additional menu options or press STOP to go back to the main display.
•
Below are the Advanced Settings options:
Screen
¤ ¥ ¥ ¦
Setting
• Controls the frequency of mowing cycles in a particular zone of
your lawn.
• The default mowing frequency is Medium (equivalent to two
mowing cycles in a week). It means that the unit will complete
the entire mowing of your lawn twice a week.
• The numbers in the menu represent the following values of
mowing frequency:
1 – LOW (one mowing cycle in a week)
2 – MEDIUM (two mowing cycles in a week)
3 – HIGH (daily mowing with accordance to Inactive Time)
• If there is more than one zone, the Mowing Frequency can be set
Mowing
for all zones together or for each zone individually. You can
Frequency
choose All for all zones or scroll to a particular zone you want to
change.
(Default = )
§
• During off-season when the growth rate of the grass is slower, it
is recommended to change the Mowing Frequency to 'LOW'. This
resting period helps the grass and prolongs the lifetime of the
mower.
• Grass growth rate changes during the year (depending on
temperature, grass type, fertilizing and etc.).
• High fertilization and favorable weather conditions may cause
the grass to grow faster. In such cases, use the Mowing
Frequency option to decrease the time between cycles.
• The minimum Interval is Every 2 Days, but it is available only for
relatively small areas, where the mower can complete mowing
the area within 2 days.
Description Options
¦ ¨ § ¨ ©