Using The Power Box; Charging - Wolf Garten Robo Scooter 300 Instrucciones De Funcionamiento

Screen Setting
TurboMow
¤ ¥ § 
(Default =
6.4.3. Robomow
Using Robomow® App you will have access to additional menu options that are not available on the mower, such as
an option to define an external setup of a Base Station or an option to set an additional window of Inactive Hours.
6.5. Operation in a Non-Base Zone (using a Perimeter Switch)
In order for the unit to operate in a Non-Base Zone, the Perimeter Switch has to be turned on and the mower should
be inside the active perimeter area.
Verify that the Perimeter Switch is connected to the zone to be mowed.
•
Press the 'ON' button to turn on the Perimeter Switch.
•
Drive/carry the unit to the lawn area. Refer to "Transportation" part of Section 1.3 for carrying instructions.
•
To initiate the operation, choose the operation mode you want, press the arrow buttons to choose the Zone you
•
want to mow and press OK to start operation (refer to Section 6.3).
When the unit completes the mowing, it will stay on the lawn. You will have to drive/carry it back to its place for
•

charging.

7.

Using the Power Box

7.1. Power Box Alerts
Event
Docking Indicator is lit.
Operating Indicator is lit
Automatic Operation On/Off
Indicator is lit.
'OFF' will be displayed on the
mower.
Wire Indicator -
Flashes and Beeps
All Indicators flash
All Indicators flash and Buzzer
sounds for 10 seconds.
Note - To stop an alert when sounding, press the On/Off Button.
• TurboMow feature allows faster and stronger mowing of a high
grass during the first cut of the season.
• When a mower is operated for the first time, or if the Factory
Defaults ("Out of the Box" settings - see Section 5.2) are invoked,
this feature is automatically set to ON to provide better mowing
results already after the initial mowing cycle. At the end of the
initial mowing cycle, the feature will be automatically disabled
)
  
(set to OFF).
• This menu allows activating TurboMow feature manually. 'U094'
("Raise mowing height when activating the TurboMow mode.")
will be displayed. At the end of the cycle the feature will be
automatically deactivated (set to OFF).
App Settings
®
The mower is in its Base Station.
The mower is not in its Base Station.
Automatic Operation is paused.
The Perimeter Wire is cut, disconnected,
or too long.
The mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
The Anti-Theft option is set to On, and
the mower was removed from its Base
Station when it was not scheduled to
Description
Alert
operate.
Automatic Operation
Docking Indicator Docking Indicator
Operating Indicator
Wire Indicator
Options
  ¨   
On/Off Button