PART 2 - Which locking mode to choose?
There are five different locking modes to choose from on your Pet Door, each with different
functions. For most cases, the standard locking mode is sufficient (see Mode 1), however, if you're
looking for slightly more specific locking settings, your needs can most likely be met in one of the
other four modes.
It is important to note that all pets are capable of exiting through the Pet Door irrespective
of their microchip ID unless the door is locked for exit.
The way to distinguish between locking modes - so that you know which one is currently selected
- is by the pictures displayed on the LCD screen. Each locking mode has a slightly different display.
These are shown in the diagrams below.
1
2
3
4
5
25
Mode 1 - Standard mode:
This is the current mode activated on your Pet Door
after purchase. It allows only your authorised pets
to enter and all pets to exit.
Mode 2 - Keep inside:
This mode allows the authorised pets to enter the
house but then they are prevented from exiting.
Mode 3 - Keep out:
Keep out mode means all pets are allowed to exit
the house and once outside, they are prevented
from re-entering.
Mode 4 - Lock both ways:
All pets are prevented from entering or exiting
the house meaning they can be kept in their current
location.
Mode 5 - Curfew mode:
By setting up and activating curfew mode authorised
pets are only allowed to leave the house during certain
times of day (see page 24).