Tabla de contenido
4.13.3 Parameter Change
4.13.3.1 Basic format
STATUS
11110000 F0
System Exclusive Message
ID No.
01000011 43
Manufacturer's ID
No.(YAMAHA)
SUB STATUS 0pppnnnn pn
p=mode (1:parameter change
or response for request
3:parameter request)
n=0-15(Rx Channel No.1-16)
GROUP ID
00111110 3E
MODEL ID(Digital Mixer)
MODEL ID
00000111 07
Device Code(AW2816)
PARAM TYPE 0ttttttt tt
Parameter type
DATA
0ddddddd dd0 data 0
:
:
0ddddddd ddn data n
EOX
11110111 F7
End Of Exclusive
Parameter
type
rx/tx
function
------+------+-----------------------------------
0x00
rx/tx
edit buffer (byte operation format)
0x01
rx/tx
setup memory (byte operation format)
0x02
rx/tx
function call (mem/lib recall,mem/lib
store)
0x10
rx/tx
edit buffer (7bit operation format)
0x40
rx/tx
edit buffer (bit operation format)
0x41
rx/tx
setup memory (bit operation format)
0x43
rx/tx
controller (key remote) (bit opera-
tion format)
4.13.3.2 Parameter Change (byte operation for
type 0x00:edit buffer)
4.13.3.2
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the specified parameter
will be controlled.
< Transmission >
If [Parameter Change TX] is ON, this message will be
transmitted on the [Tx CH] MIDI channel when a param-
eter not specified in the [Control Change Assign Table] is
edited.
This message will be echoed if [Parameter Change
ECHO] is ON.
STATUS
11110000 F0
System Exclusive Message
ID No.
01000011 43
Manufacturer's ID
No.(YAMAHA)
SUB STATUS 0001nnnn 1n
parameter change or
response
Channel No.1-16)
GROUOP ID
00111110 3e
MODEL ID(digital mixer)
MODEL ID
00000111 07
Device code (AW2816)
PARAM TYPE 00000000 00
byte operation for edit
buffer (type)
DATA
0aaaaaaa dd1 address( H) high 7 bits of
14 bits address
0aaaaaaa dd2 address( L) low 7 bits of
14 bits address
0000dddd dd3 data( H) high 4 bits of 8
bits data
0000dddd dd4 data( L) low 4 bits of 8
bits data
:
:
continuous address datas
EOX
11110111 F7
End Of Exclusive
The range of valid addresses is 0x0000 - 0x0595.
4.13.3.3 Parameter Change (7bit operation for
type 0x10:edit buffer)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the specified parameter
will be controlled.
< Transmission >
If [Parameter Change TX] is ON, this message will be trans-
mitted on the [Tx CH] MIDI channel when a parameter not
specified in the [Control Change Assign Table] is edited.
This message will be echoed if [Parameter Change
ECHO] is ON.
STATUS
ID No.
SUB STATUS 0001nnnn 1n
GROUOP ID
MODEL ID
PARAM TYPE 00010000 10
DATA
EOX
The range of valid addresses is 0x0000 - 0x0595.
4.13.3.4 Parameter Change (bit operation for type
0x40:edit buffer)
< Reception >
This message is received if [Parameter Change RX] is ON
and the [Rx CH] matches the MIDI channel included in
the Sub Status.
This message will be echoed if [Parameter Change
ECHO] is ON.
When this message is received, the specified parameter
will be controlled.
< Transmission >
If [Parameter Change TX] is ON, this message will be trans-
mitted on the [Tx CH] MIDI channel when a parameter not
specified in the [Control Change Assign Table] is edited.
This message will be echoed if [Parameter Change
n=0-15(MIDI
ECHO] is ON.
STATUS
ID No.
SUB STATUS 0001nnnn 1n
GROUOP ID
MODEL ID
PARAM TYPE 01000000 40
DATA
EOX
The range of valid addresses is 0x0000 - 0x0595.
Apéndice
11110000 F0
System Exclusive Message
01000011 43
Manufacturer's ID
No.(YAMAHA)
parameter change
15(MIDI Channel No.1-16)
00111110 3e
MODEL ID(digital mixer)
00000111 07
Device code (AW2816)
7bit operation for edit
buffer (type)
0aaaaaaa dd0 address( H) high 7 bits of
14 bits address
0aaaaaaa dd1 address( L) low 7 bits of
14 bits address
0ddddddd dd2 data 7bit
:
:
11110111 F7
End Of Exclusive
11110000 F0
System Exclusive Message
01000011 43
Manufacturer's ID
No.(YAMAHA)
parameter change
15(MIDI Channel No.1-16)
00111110 3e
MODEL ID(digital mixer)
00000111 07
Device code (AW2816)
bit operation for edit
buffer (type)
0aaaaaaa dd0 address( H) high 7 bits of
14 bits address
0aaaaaaa dd1 address( L) low 7 bits of
14 bits address
0ddddddd dd2 data(bit0-2:change bit
no.0-7, bit3:0=reset
1=set)
:
:
11110111 F7
End Of Exclusive
n=0-
n=0-
411
Tabla de contenido
