Rim Measurement - Corghi Artiglio Uniformity Manual De Uso

7.1 RIM MEASUREMENT

- select the wheel to be measured and press 'next'
- mount the wheel on the turntable, rotate the wheel to bring the valve into the 3 o'clock
position and press 'next'
- press the turntable rotation pedal and wait for the rim measurement cycle to complete
At the end of the measurement cycle, the machine displays the following values:
- radial run-out of the inner tyre bead seat on the rim
- radial run-out of the outer tyre bead seat on the rim
Press the graph buttons
ment values:
- the radial geometric run-out variation of the inner bead housing in relation to the radial
position, in terms of the 1st harmonic (light blue) and peak-to-peak (yellow) values
- the radial geometric run-out variation of the outer bead housing in relation to the radial
position, in terms of the 1st harmonic (light blue) and peak-to-peak (yellow) values and
the corresponding printout report.
Press 'print'
connected).
Press the pendrive button
been carried out to a pendrive in .pdf format.
Press the network button
Artiglio Uniformity User Manual
.
, to display the graphs relating to the following measure-
to print a report of the measurements made (if an approved printer is
to save the report listing the measurements that have
to save the report listing the measurements that have
.
EN
157