Corghi Artiglio Uniformity Manual De Uso página 152

Using inflation devices (e.g. inflation guns) connected to compressed air sources other
than the machine is not permitted.
Always comply with national safety regulations as they could be more restrictive than
what is indicated in the manual, according to the principle that a more restrictive
standard takes precedence over the less restrictive one.
If tyres being mounted require more than the
tyre manufacturer's maximum bead seating
pressure and , the wheel should be removed
from the tyre changer, placed in an inflation
cage, and inflated per manufacturer's instruc-
tions.
verify that both upper and lower tyre beads and the rim bead seat have been properly
lubricated with an approved mounting paste.
Safety goggles with plain lenses and safety footwear must be worn.
Clamp the rim on the turntable during inflation.
Remove valve stem core if not already done.
Connect inflation hose to valve stem.
Step down partially on the pedal to inflate tyre and seal beads with inflation hose. Stop
frequently to check the pressure in the bead seat with the gauge.
Avoid personal injury. Carefully read, understand and follow all instructions.
1. Overinflated tyres can explode, producing hazardous flying debris that may result in an
accident.
2. Tyres and wheels of different diameter are incorrectly matched. Do not attempt to mount
or inflate tyres with rims that do not correspond. For example, never mount a 16" tyre on a
16.5" rim, (or vice versa). It is very dangerous. Tyres and rims that do not correspond could
explode, causing accidents.
152
DANGER
CAUTION!
DANGER
CAUTION!
Artiglio Uniformity User Manual