Identification And Servicing; Technical Specifications - Grillo G55 Manual De Uso

AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for correct basic servicing which
the user can carry out personally. For all procedures not described in this manual, contact your
local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number when ordering. For engine parts, refer to the
specific manual.
WARRANTY
The guarantee is given in compliance with the current law. The Grillo dealer will supply the client
with a copy of the registration card of the machine, which they will print from the Grillo website. For
the engine, the guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced. Contact
your local dealer. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail: [email protected]
ENGINES
ROBIN SUBARU EX17 petrol engine
HONDA GX160 petrol engine
LOMBARDINI 15LD225 diesel engine
Versions with electric starter are available
MACHINE
Clutch: active clutch
Gearbox: 4 speeds as walking tractor, 2 forward gears + 2 reverse gears, 4 speeds as sickle-bar
(turning the handlebars), 2 forward gears + 2 reverse gears. Speeds in km/h with engine at 3600
rpm are as follows:
1st REVERSE
2nd REVERSE
Translation of the Original Instructions

IDENTIFICATION AND SERVICING

TECHNICAL SPECIFICATIONS G55
Gears
1st
2nd
On the frame of the walking tractor a label is
located showing its serial number. This
number must always be clearly stated when
ordering spare parts.
Speeds with tyres 4.00-8
7
1,1
2,6
1,1
2,6