Grillo G55 Manual De Uso página 17

Translation of the Original Instructions
BACK-CUTTER FURROWER
This tool is mounted at the rear of the tiller and works in tandem with it. The furrower is designed to
produce irrigation and seed drills (fig. 11).
CAUTION: Keep your hands and feet away from the rotary tiller hood when the engine is
running, rotation of the tiller is highly dangerous. Before connecting or removing the back-
cutter furrower, ALWAYS SWITCH OFF THE ENGINE.
FRONT BLADE 100 cm
This highly resistant device is ideal for removing snow and levelling mounds of soil or gravel. May
be tilted to the right and left (fig. 19). it can be connected directly to the frame for attachments. The
handlebar must be turned of 180°, placing it on the engine's side. Follow the instructions outlined
above for the assembling of the cutting bar.
ORIENTABLE AND TILTING SWEEPER – 80 cm
This sweeper (fig. 26) is very useful to clean roads and squares. It can also be used to clean up
10-12 cm high fresh snow and it can be steered left or right to make drifts. The sweeper can be
attached to the attachment coupling. The handlebar must be turned 180° over the engine: to mount
the sweeper follow the instructions outlined above for the cutting bar.
WARNINGS FOR TRANSPORT
Walking tractors cannot be used on public roads. If the machine is to be transported on a lorry or a
st
trailer, lower the handlebar, engage the 1 gear, fasten the walking tractor to the lorry/trailer using
ropes or belts. If a lifting machine is used to lift the walking tractor from the ground into the
lorry/trailer make sure its lifting capacity its suitable for the walking tractor.
15