Technical Data, See „Technical Data" Book; Function Of The Unit; Description; Basic Unit (A) - Rothenberger ROWELD P 160 B Instrucciones De Uso

17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
2 Technical Data, see „technical data" book
3

Function of the Unit

3.1

Description

ROWELD P160-630/5-24B Plus Professional are compact, portable heating plate butt fusion
welding machines that were specially designed for use at the construction sites and in particular
in pipe trenches. Of course, the tools are very well suited for use in the workshop.
The versatility of the ROWELD welding machines allows the operator to securely join 40–630
mm/ 1 1/4-24" (outer dimensions) PE - PP and PVDF pipes for all plumbing and sanitation ap-
plications as listed below:
I. pipe - pipe
II. pipe - pipe bends
III. pipe - T-joints
IV. pipe - welding neck
The essential machine components are:
Basic unit, reduction clamp insets, hydraulic unit, trimmer unit, heating plate, carrying frame.
When joining welding necks always use the flange adapter (optional accessory, must be ordered
separately).
ROWELD P160-250/5-8B: When welding pipe bends with a narrow radius of the maximum di-
ameter of the machine, this bevelled upper clamping tool should be used as an accessory.
ROWELD P500-630/18-24B Plus: To insert and remove the trimmer and the heating plate we
recommend using the electrical hoist (optional accessory, must be ordered separately).
3.1.1 Basic unit
1 Movable clamps
2 Sliding clamps
3 Spacer with locking notch
4
Heating element take-off device
5 Replaceable clamps
6 Mounting screw upper
7 Spacer
8
Mounting screw lower
ENGLISH
(A)
15