Technical Data; Function Of The Unit; Overview (A); Electric Supply - Rothenberger ROTHERM 2000 Instrucciones De Uso

Ocultar thumbs Ver también para ROTHERM 2000:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
This device is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This device can be used by children aged 8 and
above and by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a person re-
sponsible for their safety supervises them or has instructed
them in the safe operation of the device and they understand
the associated dangers. Otherwise, there is a danger of operat-
ing errors and injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the device.
The equipment must only be operated by qualified specialized
staff!
2

Technical Data

Working range: Cu-Pipe ..............................
Voltage .......................................................
Nominal Input Current ................................
Output Voltage ................................ 6 V AC
Nominal Output ................................ 2000 VA
Dimensions (L x W x H) ..............................
Weight ............................................ ca. 12,7kg
Operating mode .............................. S3 - 30%
Noise pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 60335.
3

Function of the Unit

This soldering set is particularly well suited for performing repair and modification work in rooms
or dwellings where a fire hazard exists.
ROTHERM 2000 is designed for easy, safe and timesaving soft soldering without using a tam-
per.
3.1
Overview
1
Soldering tongs
2
Pneumatic switch
3.2

Electric supply

The soldering unit must be connected to a socket with a protective earth (earthed wire). Ensure
that the mains voltage is correct! Before connecting the unit, check that the mains voltage is the
same as that specified on the rating plate.
Ø 6 – 54mm
230V (115V), 50-60Hz
max. 9A (18A)
260 x 190 x 200mm
) ............... 70 dB (A) ¦ K
pA
) ................. 81 dB (A) ¦ K
WA
ENGLISH
3 dB (A)
pA
3 dB (A)
WA
3
Flat electrodes
4
Stick electrodes
(A)
11
Tabla de contenido
loading

Tabla de contenido