Technical Data - Rothenberger ROWELD P 125 Instrucciones De Uso

hot during welding and can cause severe burns. The weld connection stays very hot for a long
time after completion.
Do not change the heating jack (8) and heating arbours (9) until they have completely cooled
down. Touching parts which are still hot causes severe burns.
Protect third persons from the hot electrical device and hot welded connections. Touching the
hot parts causes severe burns.
Do not accelerate the cooling process of the electrical device by immersing it in liquid. There is a
danger of injury from electric shock and/or sudden spurting of the liquid. The electrical device
will also be damaged.
Place the electrical device down only on its supporting stand, in the table clamp or on a fire-
retardant base. Placing the hot electrical device on a base which is not fire-retardant or in the vi-
cinity of inflammable material can damage the surface and/or cause a fire.
Only use approved and appropriately marked extension leads with a sufficient cable cross-
section. Use extension leads up to a length of 10 m with cable cross-section 1.5 mm², from 10 –
30 m with cable cross-section 2.5 mm².
Check the power cable of the electrical device and the extension leads regularly for damage.
Have these renewed by qualified experts or an authorized ROTHENBERGER customer service
workshop in case of damage.
This device is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This device can be used by children aged 8 and
above and by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a person re-
sponsible for their safety supervises them or has instructed
them in the safe operation of the device and they understand
the associated dangers. Otherwise, there is a danger of operat-
ing errors and injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the device.
The equipment must only be operated by qualified specialized
staff!
2

Technical Data

Power supply ................................ 2 30V a.c. / 110-120V a.c., 50/60 Hz, 1300 W
Working range ................................ Ø 16-125mm
Dimensions ..................................... 500x200x65mm
Weight ............................................ 3,1 kg
Protection type ................................ IP 20
ENGLISH 13