Adjusting The Printout Quality-Menu Operation; To Set Values For Each Item And Save The Settings - Sony UPX-2000 Manual De Instrucciones

Adjusting the Printout Quality—Menu Operation

To Set Values for Each Item and Save the Settings

42
You can adjust the color intensity (RED/GREEN/BLUE), gray (GRAY),
contrast (DARK/LIGHT), tone (GAMMA) and sharpness of the printout.
You can store up to three settings for color printing and three for B/W
printing. These settings are managed according to the setting number (1, 2
or 3). The color intensity, gray, picture contrast, sharpness and tone of a
printout are determined by recalling one of the six possible settings
according to setting number. This is useful when you wish to print images
shot under different lighting conditions.
Also, you can make a printout using temporarily set values, without
erasing the stored adjustment values.
After adjustment, make a printout to check the result, and readjust the
printout quality, if necessary.
For taking color pictures, a color guide for hue adjustment or light
intensity adjustment can be printed.
All values of the settings 1, 2 and 3 for color and B/W are factory-set to 0.
1
Press the MENU button on the station.
"LOAD SETTING" will appear on the LCD of the station.
2
Select an item to be adjusted by pressing the ◊ or √ button.
3
By pressing the ı or ∫ button, set the desired value for each item.
For details, see "Adjustment" page 45.
4
Press the √ or EXEC button. "SAVE SETTING" appears on the LCD.
Note
If the value has not been changed in step 3, "SAVE SETTING" does
not appear.
5
Choose the SETTING number to which the settings are to be stored by
pressing the ı or ∫ button.
6
Press the EXEC button.
The selected settings will be registered under the selected SETTING
number.
Printing a color guide
When COL is selected with the B/W/COLOR button, "COLOR GUIDE"
is displayed on the LCD in step 6 above. Choose the type of color guide
by pressing the ı or ∫ button, then press the EXEC button.
CANCEL: To cancel the color guide operation and return to the initial
display. The color guide will not be printed.
RGB: To print a color guide for hue (RGB) adjustment.
DLGm: To print a color guide for light intensity (DARK, LIGHT and
GAMMA) adjustment.
For details on the color guide, see "Color guide function" page 47.
Inst SS Ver.4.0
3-865-646-14(1)