Sony UPX-2000 Manual De Instrucciones página 30

Preparations
Connection of the camera to the station with a cable
You can connect the camera to the station with a cable, not attaching it to
the station. Connect the RS-232C connector of the camera and the
CAMERA connector of the station by using the optional RK-G136
connecting cable (stereo mini plug, ø 3.5 mm, 1.5 m) and the supplied plug
adaptor PC-262S.
For connection, first remove the cable cover, disconnect the plug already
connected to the RS-232C jack and replace the cover. You can then
connect the connecting cable RK-G136 with the plug adaptor attached
through the hole of the cable cover.
To remotely command printing, use the RM-91 remote control unit
(optional).
In both cases, ferrite filter(s) must be attached near the plug(s) as
illustrated below.
Plug adaptor
PC-262S
Connecting cable
(supplied)
RK-G136 (optional)
to RS-232C
Ferrite filter Ferrite filter
(supplied) (supplied)
to CAMERA
CAMERA REMOTE
Camera
Station
to REMOTE
Ferrite filter
(supplied) Remote control unit
RM-91 (optional)
30
Inst SS Ver.4.0
3-865-646-14(1)