Sony UPX-2000 Manual De Instrucciones página 31

Removing and reattaching the cable cover
To remove
1
Turn the screw counterclockwise.
2
Pull out the cover.
To reattach
1
Replace the cover at its original position with the disconnected plug in
a position that does not block the jacks.
2
Insert the removed screw straight through the hole of the cover to the
screw hole of the camera and turn it to secure the cover.
Attaching the ferrite filters
Release the lock of the ferrite filter with a screwdriver or a similar tool.
Wrap the cable around the filter once to hold it in place.
Ferrite filter
Inst SS Ver.4.0
Screw
Within 5 cm
(2 inches)
31
3-865-646-14(1)