Beurer BM 55 Manual De Instrucciones página 8

or cold temperatures, major temperature fluctuations,
direct exposure to sunlight and heat sources which are
too close (e.g. stoves, heating radiators). This may dam-
age the unit. The device must be stored in the speci-
fied ambient conditions. Please see section '8. Care,
maintenance and disposal' and section '10. Technical
Specifications' for details.
• Do not use any aggressive solvents, cleaning agents,
detergents or any other strong chemicals to clean the
device.
• Never immerse and or spill water or any other liquid
onto the monitor or any components, otherwise liquid
will enter it and cause damage.
• Do not wash the unit in a washing machine, dish wash-
er or tumble dryer.
• Observe the local regulations for material disposal. Dis-
pose of the device, components and optional accessor-
ies according to applicable local regulations. Unlawful
disposal may cause environmental pollution.
• Never attempt to repair, open and/or disassemble the
unit (including cuff and optional accessory) or adjust
it yourself. This may damage the unit and impair the
functions. If you need to have the unit repaired, please
contact our customer service. Please see warranty for
service contact. Before submitting any complaint, first
check the batteries and replace them if necessary.
• Changes or modifications to the device will nullify the
user warranty.
• Do not drop or insert any object into any opening or
hose. This may damage the unit.
• Do not press the buttons with excessive force or with
pointed objects.
• To conserve the batteries, the monitor switches off
automatically if no buttons are pressed for one minute.
• The device is only intended for the purpose described
in these instructions for use. The manufacturer is not
liable for damage resulting from improper or careless
use.
• If you are using the unit for the first time, please remove
the protective film from the display.
• The monitor can maintain the safety and performance
characteristics for a minimum of 10.000 measure ments
or 3 years.
• Further documents which include information for the
Calibration of the device can be asked at the service
address.
• The device can be tested in case of supposed inaccu-
racy every two years. Please contact the nearest ser-
vice address.
Cleaning and storing the device and cuff
To keep your digital blood pressure monitor in the best con-
dition and protect the unit from damage follow the direc-
tions listed below:
• When storing the device, make sure that no heavy ob-
jects are placed on top of it.
8