Charging Current Limiting; Ground Monitoring; Deactivating Ground Monitoring; Activating Ground Monitoring - Porsche 9Y0.012.003.A Manual De Instrucciones

Charging Current Limiting

The control unit detects the voltage and the available
current automatically.
The charging power to be used for charging can be
set using charging current limiting. The last charging
current set is saved.
On delivery, the charging current is automatically
limited to 50% to prevent overheating of the
electrical installation.
If the charger is connected to an energy manager,
the charging current is limited in line with the values
preset in the energy manager.
The maximum available charging current can also be
reduced by other consumers in the home network,
e.g. by an electric heater or water heater.
The charging power must never be set higher than
the maximum available power of the electrical circuit
used. If you are unsure about this, contact a qualified
electrician.

Ground Monitoring

Electric shock, short
DANGER
circuit, fire, explosion
Use of the charger without active ground monitoring
can cause electric shocks, short circuits, fire,
explosions or burns.
e The charger should preferably be operated in
earthed mains supply systems.
e Only deactivate ground monitoring in non-
earthed mains supply systems.
e Only activate ground monitoring in earthed mains
supply systems.
f Refer to chapter "Activating Ground
Monitoring" on page 35.

Deactivating Ground Monitoring

b An error message indicating an interrupted
or absent protective conductor is shown on
the display.
b Ground monitoring has interrupted the charging
process or prevents it from starting.
Power button lights up red.
Status LEDs light up red.
An error message appears on the display.
1. To deactivate ground monitoring, acknowledge
the error message with C .
ONFIRM
2. Press and hold the Power button
3 seconds.
3. Acknowledge the deactivation of ground
monitoring with C .
ONFIRM
Monitoring remains deactivated for subsequent
charging processes.

Activating Ground Monitoring

If the charger is operated in an earthed mains supply
system, activate ground monitoring.
1. Open the G menu
ROUND MONITORING
(S > G
ETTINGS ROUND MONITORING
2. Select A to activate ground monitoring.
CTIVATE
When ground monitoring is activated, the menu
item G will not appear in the
ROUND MONITORING
S menu.
ETTINGS

Charging Times

The charging duration can vary depending on the
following factors:
– Electrical socket used (household electrical
outlet or industrial electrical outlet)
– Country-specific mains voltage and electric
current
– Settings for limiting the charging current on
the charger
– Fluctuations in the mains voltage
– Ambient temperature of vehicle and charger.
Charging times may be longer if the temperature
for
is at the limits of the permitted ambient
temperature.
f Refer to chapter "Technical Data" on page 41.
– Temperature of the high-voltage battery and
control unit
– Passenger compartment precooling/heating
activated
– Current-carrying capacity of the power plug and
vehicle plug
Information
).
Due to different national mains supply systems,
various cable versions are supplied. This may result
in the full charging performance not being available.
Further information is available from your Porsche
partner.
Charging Current Limiting
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
35