Operating Instructions - Porsche 9Y0.012.003.A Manual De Instrucciones

Information
The security field contains the necessary access
codes (PIN and PUK). This field has special ink
covering these codes.
The codes are only visible when this field is
dampened in running water.
Do not rub or scratch the field while dampening it,
as the codes could also be damaged.
PIN and PUK
The PIN and PUK are used for unlocking the charger.
e If you lose or forget a PIN you set yourself, unlock
the charger by entering the PUK and set
a new PIN.
e If you lose or forget the PUK, contact your
Porsche partner.
Password for web application
The password is used for logging into the web
application.
When using the initial password:
e If you lose or forget the initial password,
contact your Porsche partner.
When using a password you set yourself:
e If you lose or forget a password you set yourself,
reset the charger to factory settings and
re­activate the initial password (S
F ).
ACTORY SETTINGS
Serial number of the charger
The serial number of the charger can be found in the
following places:
– In the letter containing access data after
the designation "Serial Number"
– On the identification plate (on the back of
the control unit) after the abbreviation "SN"
– On the charger: S
– In the web application: S
D
EVICE INFORMATION
Porsche ID
When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche and in the
Porsche Connect app.
If you will no longer be using the charger, e.g. if you
sell it:
1. Unpair the charger from your Porsche ID
(S
ETTINGS
2. Reset the charger to factory settings
(S
ETTINGS

Operating Instructions

In some countries, the relevant authorities must
be notified when you connect electric vehicle
charging equipment.
>
e Check any obligations to notify the authorities
ETTINGS
and legal requirements for operation before
connecting charging equipment.
> I
ETTINGS NFORMATION
> M >
ETTINGS AINTENANCE
> U ).
SER PROFILES
> F ).
ACTORY SETTINGS
Operating Instructions
Damage to the
NOTICE
charger
e Always place the charger on a solid surface when
charging.
e Porsche recommends that you operate the
charger in the basic wall mount or in the charging
dock. In some countries, e.g. in Switzerland
the charger may only be used in the basic wall
mount or in the charging dock.
e Do not immerse the charger in water.
e Protect the charger from snow and ice.
e Handle the charger carefully and protect it from
potential damage resulting from being driven over,
dropped, pulled, bent or crushed.
e Do not open the charger housing.
1) Time of printing. Further information is available from
your Porsche partner.
Damage to the
NOTICE
charger
The charger must only be operated within
a temperature range from –30 °C to +50 °C.
e To prevent overheating during operation,
avoid continuous exposure of the charger to
direct sunlight. If the charger overheats,
charging will be interrupted automatically until
the temperature has returned to the normal
range.
e If the charger is too hot or too cold, let it return
slowly to the operating temperature range and do
not actively cool it down or heat it, e.g. by cooling
it down with cold water or heating it with
a hairdryer.
DE
EN
FR
IT
1)
,
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
27