Key 5- Network; Select The Network Device; Disable Network Device - Bentel Security FC500 Manual Del Usuario

Key 5- Network

If Key 5 is used to select the Disable Network devices
option, after the control panel has been selected, you
will be asked to select which device you wish to disa-
ble/enable; this device will then be disabled/enabled ac-
cordingly.
n Select the Network device
In this file:
Alphanumeric keypad Use the Alphanumeric keypad
to select the identification number of Network device.
Cursor Keys Use the UP Key to show the next type of
network device ;
Use the Down Key to show the previous type of net-
work device;
The type of devices are: Repeater 1-8
terface)
No function is related to Right Key;
No function is related to Left Key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER Key Use ENTER key to confirm and step on
next page.
Function Keys No function is related to F1 key;
No function is related to F2 key;
Use the F3 key to cancel the numbers, if mistaken, in-
sert the new number;
No function is related to F4 Key.
Control Panel name
Identification number
Master panel
Repeater: 001
Up or Down to select the type
Enter the Repeater number
Device name
Device Control Panel name
Dis./Enable
Master panel
Repeater: 001
ENABLED
Disabled?
Actual Status Request Enable/Disable
Figure 70 Display Disable/enable Network device
56
Slave Control panel (1-7)
My NET i/f --(local network in-
This symbol shows the
presence of the connection
between the User Interface
and the Main Board
Control panel
The symbol KO shows the
Access Level
Status
connection fails
lev.2 : DISABLE
Control panel
Access Level
Status
lev.2 : DISABLE
Analogue Fire Panels
n Disable Network device
in this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
No function is related to Right Key;
No function is related to Left Key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER Key Use ENTER Key to confirm.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
Control Panel name
Master Panel
PSTN i/f
UP or Down per to select the type
Communicator Type
Communicator
Dis./Enable
Master Panel
PSTN i/f
ENABLED
Disabled it?
Present status Request Enabled/Disabled
Figure 71 Dispaly Enabled/Disabled Telecom (Com-
municator
This symbol shows the
presence of the connection
between the User Interface
and the Main Board
Control panel The symbol KO shows the
Status
Access Level connection fails
lev.2 : DISABLE
lev.2 : DISABLE
FC500