Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Read through the following section carefully, in order to
get an overall view of how to use the Programming for
the Users. For details regarding the parameters of each
phase, refer to the respective paragraph in the
"PROGRAMMING FROM A PC" chapter of the Installa-
tion Manual.
From Main Page (see Figure 38) STAND-BY STATUS,
the User can manage without Password:
Ø View parameters (Use F2=ANALYZE)
Ø View Log (Use F3= View LOG or F2=ANALYZE and
then use 8 Key)
Ø View Lists (Use F4= MORE and then F2)
and with password (User password) can manage this
menu:
Ø Modify
Ø Disable
n View parameters
The Display (Figura 47) shows how to manage the view
of the different parameters:
In this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to select the different view functions:
1= Loop: start the procedure of selection and view of
the loop data;
2= Device: start the procedure of selection and view of
the device data on Loop;
3 = SW zone: activates the selection and display proce-
dure for the data corresponding to a SW zone;
4 = Output: activates the selection and display proce-
dure for the data corresponding to an outlet;
5= Network: start the procedure of view of all devices
(Repeaters and Slave panel) in the Network
Control panel name
Master panel
1=Loop
5=Network
9=FW ver.
Options
Figure 47 Display: View Parameters.
42
VIEW-LOG-PARAMETERS
Access Level
2=FC dev.
6=Telecom
Analogue Fire Panels
6 = Telecom: activates the selection and display proce-
dure for the data corresponding to a telecommunication
interface;
7 = Option: activates the Option display mode;
8= Log: start the procedure of view of the restored
events;
9= Fw ver.: start the procedure of view of FW version ;
Cursor keys No function is related to UP key.
No function is related to Down key;
No function is related to Right key;
No function is related to Left key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER Key No function is related to ENTER key
Function Key No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 key.
Control panel status
lev.1: ANALYZE
3=SW zone
4=Output
7=Option
8=Log
This symbol shows the presence
of the connection between the
User Interface and the Main Board
FC500
Tabla de contenido
