Tabla de contenido
Idiomas disponibles
Idiomas disponibles
In the following chapters the descriptions of FC500
DISPLAY will be shown according to different status of
fire control panel:
STANDBY STATUS;
WARNING STATUS;
PREALARM STATUS;
ALARM STATUS;
FAULT STATUS.
n STANDBY STATUS
The
STANDBY STATUS will be indicated by the
STANDBY Display (see Figure 38).
In this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor keys The UP Key: increase the brightness of
LCD display;
the Down Key: decrease the brightness of LCD display;
the Right Key: decrease the contrast of LCD display;
the Left Key: increase the contrast of LCD display;
ESC Key No function is related to ESC key.
ENTER Key No function is related to ENTER key.
Function Keys Use F1 Key to select the Program-
ming or Disable phase;
Use F2 Key to select the Analyze phase or to show the
list of disabled devices;
Use F3 Key to show the events in the LOG or to select
the Modify phase;
Use F4 Key to select the functions related to F1, F2, F3
Keys.
Related functions to
F1, F2, F3, F4 Keys
F1=Program
F2=Analyze
F3=View Log
F4=More
Figure 38 DISPLAY: STANDBY STATUS- Access to the contro panel managing
(1)- In a Repeater display, this symbol will be shown by turns with the address of the repeater itself.
Access Level
lev.1 : READY
18:50 27 - 18/05/07
Working Activity
- ENGLISH - INTRODUCTION
This symbol shows the presence
of the connection between the
Control panel
Status
User Interface and the Main Board
(1)
FIRE CLASS IS
SCANNING LOOP
:
37
Tabla de contenido
