Key- View Network; Key- Telecom - Bentel Security FC500 Manual Del Usuario

5 KEY- View NETWORK

Use the 5 Key to view the Network devices, Slave con-
trol panels and Repeaters (see figure 52).
In this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
No function is related to Right key;
No function is related to Left key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key No function is related to ENTER key.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
+
The link status can be:
OK! = Device working: Stand-by status;
KO! = Link problem;
_ _ _ = Device not assigned;
ALR = Control panel in Alarm;
PRE = Control panel in Prealarm;
FAU = Control panel in Fault;
WRN= Control panel in Warning
DIS = Network device disabled
OLD= Old FW version
Access Level
NETWORK
PANELS MS S1 S2
ok! ok! ok! ok! ok! ok! ok! ok!
REPEATERS R1 R2 R3
ok! ok! ok! ok! ok! ok! ok! ok!
Network type
devices
Figure 52 Example of Display: View Network (Slave
control panel and Repeaters)
46
Control Panel Status This symbol shows the presence
of the connection between the
User Interface and the Main Board
l1-status: ANALYZE
S3 S4 S5 S6 S7
R4 R5 R6 R7 R8
Link status
Analogue Fire Panels

6 KEY- TELECOM

If key 6 is used to select the Communicators connected
to the control panel, the screen shown in Figure 53 will
appear. In addition to the Firmware version, the PSTN
Telecom module status will be displayed using the follo-
wing abbreviations:
-FAU: Telecom module breakdown
-ACT: call in progress
-OK!: FC500PSTN in Standby
+
Only the Firmware version and address of the
FC500IP module will be displayed, as it is a control
panel interface.
In this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
No function is related to Right key;
No function is related to Left key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key No function is related to ENTER key.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is r elated to F4 Key.
Communicators status
FW ver.
PSTN: OK! 01.00.09
IP : 01.00.09
Type of Communic. Firmware Rev.
Figure 53 Display Communicators
Address
192.168.000.101
IP Address of the
FC500IP module
FC500