Key 1- Disable list
Use the 1 key, or from Standby status use F4 key
(More) and than F2 to select "Disabled List"; (see Figu-
re 65).
+
If any of the elements have been disabled, the cor-
responding number will blink and the Disable indi-
cator light will be glowed. If the Communicator is
disabled, the yellow indicator light (Communicator)
will also be glowed.
In this phase:
See paragraph View List in the chapter "View Parame-
ters".
Key 2- FC devices (Disable)
Use the 2 key to select "FC Device" Disable; after the
control panel, the Loop can be selected (see Figure 66).
n Select the Loop
In this phase:
Alphanumeric keypad No function is related toAlpha-
numeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
Use the Right Key to select the next Loop;
Use the Left Key to select the previous Loop.
ESC Key Use ESC key to cancel the operation and to
step back to main page.
ENTER key Use ENTER key to confirm and to active
the page of the selected Loop.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
n Select the Device
in this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to insert the device address.
+
If the device is in the system, the square brackets
will shown near the address, on the contrary if the
address does not exist or it is different from that se-
lected in the underlying bar, the arrows will shown.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
Use the Right Key to select the next avaible Device;
Use the Left Key to select the previous avaible device.
ESC Key Use ESC key to cancel the operation and to
step back to main page.
ENTER key Use ENTER key to confirm and to active
the page of the selected device.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
n Disable device on the Loop
Selected the fire control panel, the Loop and then the
device, the Display will show Figure 66.
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
No function is related to Right Key;
No function is related to Left Key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key Use ENTER key to confirm and disable
the detector.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
Control Panel name
Master control panel
1=Dis. list
4=Output
7=Conv.zone
Options
Figure 66 Display "Dis. List" menu
DISABLE
This symbol shows the
Control panel
presence of the connection
Status
between the User Interface
Access Level
and the Main Board
lev.2: DISABLE
2=devices
3=SW zone
5=Network
6=Telecom
53