Key 7- View Option; Key - View Fw Version; View Lists (Use F4= More And Then F2) - Bentel Security FC500 Manual Del Usuario

KEY 7- View Option

If Key 7 is used to select Display options, the screen
shown in figure 56 will appear. The status of the
DAY/NIGHT MODE options will be indicated using the
following abbreviations:
-DAY: day mode
-NGT: night mode
-AUT: automatic mode.
In this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
No function is related to Right key;
No function is related to Left key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key No function is related to ENTER key.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.

9 Key - View FW version

The option Ver. FW of the View Parameters Menu al-
low you to view the Firmware version of Fire control pa-
nel.
Use the 9 key to view the Firmware version of Fire
control panel (see Figure 56).
FIRMWARE VERSIONS
"MAIN CONTROLLER
" LOOP CONTROLLER
"USER INTERFACE
Figure 56 Display: View FW. ver.
Options
DAY NIGHT MODE
DAY ngt aut
^
Mode Type
Figure 57 Display: View Option
48
The symbol shows the presence
of the connection between the
User Interface and the Main Board
ver 01.00 sv01"
ver 01.00 sv03"
ver 01.00 sv02"
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel status
KO symbol will be shown if the
connection fails
Access Level
Lev.1: ANALYZE
Analogue Fire Panels

View Lists (Use F4= MORE and then F2)

Directly from the STANDBY status (see Figure 38), use
the F4 =MORE Key and then F2= View Lists.
The option View Lists allow you to view:
Ø 1- Dis. Zone-Disabled zones
Ø 2-Dis. Device-Disabled devices
Ø 3-Dis. Part-Disabled Parts
Ø 4-Walk test - Walk test Zones
Ø 5-Faults List
Ø 6-Warnings List
Ø 7-Dev. in test (Devices in test).
+
The lists containing data (not empty) are indicated
by the blinking of the corresponding number
In this phase:
Alphanumeric keypad Alphanumeric keypad is used
to select and access the View function (see options
above).
Cursor Keys The UP Key, used to navigate the list, di-
splays the next element; ;
The Down Key, used to navigate the list, displays the
previous element;
No function is related to Right key;
No function is related to Left key.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key No function is related to ENTER key.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
Control panel name Acces level
Master Panel
1=Dis.Zone 2=Dis. Dev.
4=Walk Test 5=Faults
7=Dev.in Test
Choise Options
Figure 58 Display: View List
This symbol shows the presence
Control panel status of the connection between the
User Interface and the Main Board
lev.1 : ANALYZE
3=Dis.Part
6=Warnings
FC500