Key - View Devices; Select The Loop; Select The Device; View Device On The Loop - Bentel Security FC500 Manual Del Usuario

2 KEY - View Devices

Use the2 Key to view the Loop devices (see figure 49).
In this page: Select the Loop and then the device.
n Select the Loop
in this phase:
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
Use the Right Key to select the next avaible Loop;
Use the Left Key to select the previous avaible Loop.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key Use ENTER key to confirm and to active
the page of the selected Loop.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
n Select the device
After selecting the Loop, the figure 49 is shown, where
are the Loop details;
in this phase:
Alphanumeric keypad Use the Alphanumeric keypad
to insert the device address.
+
If the device is in the system, the square brackets
will be shown near the address, on the contrary if
the address does not exist or it is different from that
selected in the underlying bar, the arrows will be
shown.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
Use the Right Key to select the next avaible Device;
Use the Left Key to select the previous avaible device.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key Use ENTER key to confirm and to active
the page of the selected device.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
n View device on the Loop
Selected the fire control panel, the Loop and then the
device, the Display will show Figure 49.
in this phase:
44
Centrale master
Initial of the selected
Loop
Control panel name
Centrale master
Add= > 123 <
D001 [d187] m250
Inserted
address
Address
Office Zone
Add:163 Type:801PH
Figure 49 Following diplays of View devices on the
Loop
Alphanumeric keypad No function is related to
Alphanumeric keypad.
Cursor Keys No function is related to UP Key;
No function is related to Down Key;
the Right Key: displays the status of the next device on
the same loop; in the case of modules with several in-
puts or outputs, this means it is possible to scroll thro-
ugh them.
the Left Key: displays the status of the previous device
on the same loop; in the case of modules with several
inputs or outputs, this means it is possible to scroll thro-
ugh them.
ESC Key Use ESC key to cancel the operation and to
step back to previous page.
ENTER key No function is related to ENTER key.
Function Keys No function is related to F1 key;
No function is related to F2 key;
No function is related to F3 key;
No function is related to F4 Key.
Analogue Fire Panels
Control panel status
Control panel name
Access level
lev.1 : ANALYZE
Master Control panel
Choose Loop
Loop 1
[ L1 ] L2
List of the Name of the
present Loop selected Loop
This symbol shows the
Control panel status
device
Access level
presence
lev.1: ANALYZE
Master control Panel
Loop 1
801PH
Selected List of the Selected device
device present type
devices
Control panel status
Device name
Type
stat: WORKING
s=07% -----|--t=60%
T=26% ------|-A2S
Sizes value
tested by detector current value and
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Name of the selected
Control panel
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Name of the
selected
Control panel
Name of the
selected Loop
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Threshold
Function
mode
Pattern of the
Threshold
FC500