GENERGY SILENT Serie Instrucciones De Uso página 96

2 Place an appropriate container under the oil draining hose to collect the
drained gasoline.
3 Using a screwdriver, loosen the carburetor draining screw. Gasoline will begin
streaming from the carburetor draining hole. Once all of the gasoline is drained,
tighten the draining screw again.
4 Remove the spark plug (see chapter 10.3) and pour a teaspoon of clean
engine oil (10 ~ 20 ml) in the cylinder. Pull the startup handle gently, this will
make the engine spin and distribute the oil. Then install the spark plug again.
5 Pull the starter rope slowly until you feel resistance. In this point, the piston is
rising in its compression stroke and the intake and exhaust valves are closed.
This position helps protecting the engine against internal corrosion.
DRAINING SCREW
OUTPUT DRAIN HOSE
93
CARBURATOR OVERFLOW OUTLET