Programming The Automatic Mode - GENERGY SILENT Serie Instrucciones De Uso

8.4 programming the automatic mode

The battery is extremely important to start in automatic mode, before programming
the equipment check that the battery is the correct and is charged.
1 Turn the gasoline valve to the "ON" position.
3 Turn the start up key to the "ON" position.
4 Check that the general
network is connected to the
terminals "IN
POWER" of the control
panel and that there is
voltage. Electricity passes
through the generator and
goes out through
"ELECTRICAL OUTLET".
MAIN
INLET
NETWORK 230V
74
OUTLET
230V