GENERGY SILENT Serie Instrucciones De Uso página 84

The generator is on alert and ready to start in case of power failure.
Before connecting the generator to the inverter&Charguer you can simulate a
start up and stop test by yourself:
1 Join the contacts and keep them together with a piece of wire as shown in the
figure below.
2 The generator will begin the process of start up and it will start up.
3 After 20 seconds since start up the generator will begin power generation.
4 To stop the equipment, detach the cable from the contacts; after a few seconds
the group will stop and will remain at rest.
If you have any questions, please contact us at [email protected]
81