Mondolfo Ferro MT 3800 LASER Manual De Uso página 58

In this phase, the machine could automatically
change the type of weight on the inner plane
from clip to adhesive (Easy ALU 1).
EASY ALU 1
Returning the arm to the rest position makes it
possible for the operator to change this setting,
selecting and using the Kis knob or the enter
button to press the icon
the balancing programme switches from Easy
ALU 1 to Easy ALU 2 and vice versa.
Wheel data entry for wheel
balancers with an ultrasonic
sensor (if installed)
To enter the distance, diameter and width values
automatically, proceed as follows:
- Bring the automatic measuring arm into con-
tact with the inner side of the rim (fig.14).
Take great care to position the arm correctly
so as to ensure accurate data reading.
58
- Keep the arms in contact with the rim until
the machine has acquired the values. Geo-
metric data (distance, diameter and width)
are displayed. The following screen appears
during this phase:
- if only one measurement is taken, the machine
interprets the presence of a rim with balan-
cing using a clip weight (Dynamic Balancing
. In this case,
Programme)
- when the automatic internal measurement arm
returns to the rest position, the following icons
are automatically displayed on the screen:
-
ENTER button enables alternatively the type
of tyre, that is P TYRE
Tyre) for medium sized wheels (wheels with
a tyre shoulder that does not protrude much
from the rim) or LT TYRE
Truck Tyre) for large sized wheels (such as
off-road, trucks or wheels with a tyre shoulder
that protrudes considerably from the rim);
-
manual entry of the width;
- Pressing the
indicated phase returns to the working en-
vironment, maintaining the previous width.
: pressing the Kis knob or the
: pressing the Kis knob enables the
MT 3800 LASER - Operator's manual
(Passenger
(Light
button during the