Introduction - Mondolfo Ferro MT 3800 LASER Manual De Uso

INTRODUCTION

The purpose of this manual is to provide the
owner and operator with effective and safe
instructions for the use and maintenance of
the wheel balancer.
If these instructions are followed carefully, the
machine will give you the efficient and long
lasting service that has always characterised
the manufacturer, thus making your work con-
siderably easier.
The following paragraphs define the levels of
danger regarding the machine, associated with
the warning captions found in this manual.
DANGER
Refers to immediate danger with the risk of
serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before starting
the machine. Keep this manual and all illus-
trative material supplied with the machine in
a folder near it where it is readily accessible
for consultation by the operators.
The technical documentation supplied is con-
sidered an integral part of the machine; in the
event of sale all relative documentation must
remain with the machine.
The manual is only valid for the machine model
and serial number indicated on the nameplate
applied to the machine itself.
WARNING
Comply with the contents of this manual: any
uses of the machine that are not specifically
described are under the full responsibility
of the operator.
46
Note
Some of the illustrations contained in this
booklet have been taken from pictures of
prototypes: standard production machines
may differ slightly in certain respects.
These instructions are for the attention of
personnel with basic mechanical skills. We
have therefore condensed the descriptions of
each operation by omitting detailed instruc-
tions regarding, for example, how to loosen or
tighten the fixing devices. Do not attempt to
perform operations unless properly qualified
or with suitable experience. If necessary,
please contact an authorised Service Centre
for assistance.
MT 3800 LASER - Operator's manual