Key To Caution And Instruction Labels; Main Characteristics - Mondolfo Ferro MT 3800 LASER Manual De Uso

and characteristics of the machine.
- Keep unauthorised persons well clear of the
working area.
- Make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force.
- Make sure that all machine operators are
suitably trained, that they are capable of
using the machine correctly and safely and
that they are adequately supervised during
work.
- Do not touch power lines or the inside of
electric motors or any other electrical equip-
ment before making sure that they have been
powered off.
- Read this booklet carefully and learn how to
use the machine correctly and safely.
- Always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
WARNING
Do not remove or deface the DANGER,
WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If
one or more decals have been detached or
damaged, replacements can be obtained from
your nearest dealer.
- When using and carrying out maintenance on
the machine, observe the unified industrial ac-
cident prevention regulations for high voltage
industrial equipment and rotating machinery.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents as a result of such alterations.
Specifically, tampering with or removing the
machine's safety devices is a breach of the
regulations for industrial accident prevention.
WARNING
During work and maintenance operations,
always tie back long hair and do not wear
loose clothing, ties, necklaces, wristwatches
or any other items that may get caught up in
the moving parts.
52
Key to caution and instruction
labels
Never use the wheel spin
shaft as a lifting point for the
machine.
Unplug the power supply plug
before performing any main-
tenance/repair operations on
the machine.
Do not lift the guard when the
wheel is rotating.

MAIN CHARACTERISTICS

- Automatic machine self-diagnostics when
starting up.
- Variable balancing speed (from 75 to 98 rpm
depending on the wheel type) so as to:
• minimise spin times;
• reduce risks resulting from moving parts;
• increase energy saving.
- Wheel positioned close to the operator so as
to make the application of adhesive weights
easier.
- Automatic sensor for measuring distance and
diameter and for adhesive weight application
in Easy Alu programs.
- AWD (Auto Width Device) programme for
measuring the width using an ultrasonic sensor
(available upon request).
- "AWC" (Auto Width Calculation) programme
for enabling the manual insertion of the width
(machine versions without the ultrasonic
sensor).
- Automatic stop of the wheel at the end of the
spin.
- Wheel-holder shaft clamping brake (but-
ton-operated).
- STOP button to stop the machine immediately.
- Side flange-holder.
- Top tray for storing weights and most fre-
quently used accessories.
- Automatic execution of balancing procedure
when the guard is lowered.
- High-resolution LCD monitor, indispensable
MT 3800 LASER - Operator's manual