Switching On The Machine - Mondolfo Ferro MT 3800 LASER Manual De Uso

WARNING
Do not use the machine without the guard and
do not tamper with the safety device.
CAUTION
Do not clean or wash the wheels mounted on the
machine with compressed air or jets of water.
WARNING
Only original the manufacturer equipment is
recommended for use with the machine.
WARNING
Get to know your machine: the best way to
prevent accidents and obtain top performance
from the machine is to ensure that all operators
know how the machine works.
Learn the function and location of all the
controls.
Carefully check that all controls on the machine
are working properly.
To prevent accidents and personal injury, all
the equipment must be correctly installed,
correctly operated and correctly serviced.

SWITCHING ON THE MACHINE

Connect the power supply cable (A, fig. 13)
supplied with the machine from the external
electrical panel located on the rear side of the
wheel balancer body to the mains.
A
MT 3800 LASER - Operator's manual
Switch on the machine using the switch located
on the left side of the casing (B, fig. 13a).
The wheel balancer performs a checking test
and, if no anomaly is detected, a beeper sounds
and the machine displays customisation data
and mark, then waits for the wheel's geometric
data to be entered.
Turning the Kis or by pressing the Kis knob or the
enter button
sible to display the image of the unbalance value;
the initial active status will be:
- dynamic balancing mode;
- values displayed: 000 000;
- unbalance display at 5 g (or 1/4 of an ounce)
increments;
- sensor value rounding-off active;
- default geometric values:
width= 5.5", diameter = 14", distance = 150;
- operator 1 active.
Note: if the image is not centred on the LCD
monitor, adjust it using the controls located
on the front part of the monitor. For further
information on the adjustment procedure, refer
to the monitor manual provided, which can be
found inside the packaging.
Now the operator can set the data of the wheel
to be balanced or select one of the programmes
13
available.
B
or arrow
13a
, it is pos-
UK
55