Technical Data; Machine Dimensions; Working Range - Mondolfo Ferro MT 3800 LASER Manual De Uso

aid for executing new programmes.
- User-friendly graphics for fast and effective
learning of the machine's functions.
- Touch-sensitive keypad for data entry and
programme selection.
- On-screen interactive help.
- Multi-language texts.
- Multi-microprocessor processing unit (32 bit).
- Unbalance value display in grams or ounces.
- Unbalance measurement accuracy: 1g (1/10
oz).
- Wide selection of programmes.
- Two rounding-off modes to display unbalances.
- Balancing modes available:
• Standard: dynamic on the two sides of the
rim.
• Alu / Easy Alu: seven different methods for
alloy rims.
• Motorcycle dynamic: dynamic on the two sides
for motorcycle rims.
• Motorcycle ALU: dynamic on the two sides
for alloy motorcycle rims.
• Static - on a single plane.
- "Mobile planes" program (in Easy Alu) for us-
ing multiple five gram weights, i.e. available
without the need for partial cuts.
- "Hidden weight" program (in Easy Alu) for
dividing the outer side balancing adhesive
weight into two equal weights positioned
behind the rim spokes.
- "Split Weight" programme (in motorcycle pro-
grammes) for dividing the calculated weight
into two equal weights positioned behind the
rim spokes.
- "OPT Flash" programme for removing residual
unbalances.
- "FSP" (Fast Selection Program) programme
for the automatic selection of the balancing
programme.
- "EASY WEIGHT" Programme (available upon
request).
- General utility programmes:
• independent calibration of the machine's
components;
• main screen customisation;
• spin overall and partial number counter;
• selection of the 2 most used programmes;
• visualisation of the service and diagnostics
page.
- Independent working environments that allow
a maximum of three operators to work in
parallel with no need to reset any data.
- RPA: automatic wheel positioning in the po-
sition where the balancing weight has to be
applied.
- "Visual inspection" function that allows
MT 3800 LASER - Operator's manual
roundness defects of the wheel and rim to
be visually checked.
- Possibility to select the position for applying
the adhesive weight:
- Vertical plane in the lower part of the wheel
(H6) using the LASER line
- Vertical plane in the upper part of the wheel
(H12)
- CLIP: using the weight-holder terminal in the
Easy ALU balancing programmes (in all the
other H12 balancing programmes)

TECHNICAL DATA

Power supply voltage: .... 1Ph 100-230V 50-60Hz
Rated current: .................................1.7-4A
Overall power: .................................400W
Balancing speed: ..................... 75-85-98 rpm
Maximum unbalance value calculated: ......999g
Average wheel spin time (with 5"x14" wheel): ..
...............................................5.5 sec.
Shaft diameter: .............................. 40mm
Working environment temperature: ...5 to 40°C

Machine dimensions

depth with guard closed ................. 1379 mm
depth with guard open ..................... 984 mm
width with guard .......................... 1500 mm
height with guard closed ................. 1639 mm
height with guard open ................... 1886 mm

Working range

automatic rim width.................from 1.5" to 20"
manual rim width.....................from 1.5" to 25"
automatic rim diameter................from 1" to 28"
rim diameter can be set manually.....from 1" to 35"
automatic max. wheel/machine distance ...........
......................................from 1 to 350 mm
max. wheel/machine distance can be set manually
...................................... from 1 to 500 mm
max. wheel width (with guard)...............560 mm
max. wheel diameter (with guard)............1118mm
maximum wheel weight..........................75 kg
Machine weight (without accessories).........140 kg
Operating noise level.......................<70 dB(A)
UK
53