GENERAL NOTES ON THE MAIN
MENU
Graphics are completely icon based (drawings
and symbols that represent the function of the
button). If an icon is selected, the relevant func-
tion is activated.
Four icons can be found on the left part of the
monitor:
help;
highest accuracy;
utility and configuration programmes;
balancing programmes.
To select the icon desired, use the Kis or the arrow
keys until the icon desired is highlighted.
Make the selection by pressing the Kis knob or the
ENTER
button.
The functions of every icon in the main menu are
listed below:
1. Balancing programs icon
; if called up, it groups the functions
relating to the balancing types.
2. The utility and configuration programmes
icon groups all utility and configur-
ation programmes of the machine.
3. The highest accuracy
56
balancing results to be displayed with best
possible accuracy ("G x1" or "Oz 1/10").
4. The help
ation relating to the current screen. If an
error message is displayed, the first piece of
information displayed concerns the type of
errors that may occur. The instructions called
up by this icon integrate (but do not replace)
this User Manual.
By default the icons relating to points 3 and 4 are
those described above but can be replaced with
more frequently used ones (refer to the "Preferred
programme configuration" section).
balancers without an ultrasonic
The machine allows for the diameter and distance
values to be entered automatically; the width value
can be entered using the keypad.
- Bring the automatic measuring arm into contact
with the inner side of the rim (fig.14). Take great
care to position the arm correctly so as to ensure
accurate data reading.
icon allows
MT 3800 LASER - Operator's manual
icon displays the inform-
WHEEL DATA ENTRY
Wheel data entry for wheel
sensor
14