Idiomas disponibles
Idiomas disponibles
1. Introduction
Congratulations on the purchase of your new device. You have thus chosen a high-quality product. The manual is part of this product. It contains important in-
structions for safety, use and disposal. Familiarise yourself with all operating and safety instructions before using the product. Only use the product as described
and for the specified areas of application. Hand over all documents when passing the product on to third parties.
1.1 Intended use
The compressor is used to operate pneumatic tools in the home workshop. It is designed to draw in and compress clean, dust-free, dry and uncontaminated
ambient air. The ambient air must not contain any aggressive or flammable admixtures. The compressor may only be used in closed spaces with sufficient ven-
tilation. Pneumatic tools can be connected to the compressor and used for blowing, screwing, tacking and varnishing. Read the relevant manual for the correct
use of these pneumatic tools. The compressor and the connected pneumatic tools may only be operated by a trained person. For persons with limited physical,
sensory or mental abilities as well as children and adolescents, operating the compressor and connected pneumatic tools is prohibited. Intended use also in-
cludes compliance with all the information in this manual.
In connection with a compressor, the pneumatic hose is used to supply pneumatic tools with energy. The pneumatic hose is exclusively meant for the transport
of compressed air. It is not suitable for transporting liquids or gases such as oxygen.
The pneumatic tyre inflation gauge is suitable for inflating bicycle tyres, inflatable boats, air mattresses, balls, etc. The device can be used to measure pressure
and release compressed air. The device is NOT suitable for inflating car tyres.
Any other use or modification of the products is considered improper and involves considerable risk of accidents. We accept no liability for damage resulting
from improper use. The products are intended for private use only and may not be used commercially or industrially.
1.2 Scope of delivery
1 Compressor
2x Wheels
2x Feet
Assembly material:
4x Flange nut
2x Nut
2x Wheel bolts
2x Washer
2x Hexagon head screws
1x Spiral hose, 5m
1x Pneumatic tyre inflation gauge
3x Valve adapter
1x Extension nozzle
1x Manual
1.3 Features
1 Transport handle
2 Quick coupling (for the hose connector)
3 Pressure vessel (tank)
4 Wheels
5 Drain plug (for condensation)
6 Feet
7 Safety valve
6
GB/IE/NI/CY/MT
VERTICAL COMPRESSOR PVKO 50 C3
8 On/off switch
9 Pressure gauge (output pressure)
Pressure regulator
10
Pressure gauge (vessel pressure)
11
Flange nuts
12
Nuts
13
Washers
14
Wheel bolts
15
Hexagon head screws
16
Spiral hose (pneumatic hose)
17
Pressure gauge
18
Drain valve
19
Connector plug
20
Trigger
21
Quick-release lever
22
Hose with quick-release lever
23
Valve adapter
24
Ball pin
25
Universal adapter
26
Extension nozzle
27
