Idiomas disponibles
Idiomas disponibles
d) Remove adjustment tools or spanners before switching on the power tool. A tool or spanner lodged in a rotating part of the power tool may cause
injury.
e) Avoid abnormal posture. Make sure you stand securely and keep your balance at all times. This gives you better control of the power tool in
unexpected situations.
f) Wear appropriate clothing. Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts. Loose clothing,
jewellery or long hair can be caught by moving parts.
g) If dust extraction and collection devices can be fitted, make sure they are connected and used correctly. Using a dust extractor can reduce
hazards from dust.
h) Do not lull yourself into a false sense of security and do not ignore the safety rules for power tools, even if you are familiar with the power
tool after using it many times. Careless action may lead to serious injury within a fraction of a second.
4) Use and handling of the power tool
a) Do not overload the power tool. Use the designated power tool for your work. With the right power tool, you will work better and safer in the
specified power range.
b) Do not use a power tool whose switch is defective. A power tool that can no longer be switched on or off is dangerous and must be repaired.
c) Unplug the power tool and/or remove a detachable battery before making any device adjustments, changing insert tool parts or putting
the power tool away. This precaution prevents the power tool from starting accidentally.
d) Keep power tools not in use out of the reach of children. Do not allow anyone to use the power tool who is not familiar with it or has not
read these instructions. Power tools are dangerous when used by inexperienced persons.
e) Maintain power tools and insert tools with care. Check whether moving parts function properly and are not jammed, whether parts are
broken or damaged in such a way that the function of the power tool is impaired. Have damaged parts repaired before using the power
tool. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges jam less and are easier to control.
g) Use power tools, accessories, insert tools, etc. according to these instructions. Take into account the working conditions and the job to be
done. Using power tools for applications other than those for which they are intended may lead to dangerous situations.
h) Keep handles and grip surfaces dry, clean and free from oil and grease. Slippery handles and grip surfaces do not allow safe operation and control
of the power tool in unforeseen situations.
5) Service
a. Have your power tool repaired only by qualified personnel and only with original spare parts. This ensures that the safety of the power tool is
maintained.
2.2 Additional safety information
Do not expose the compressor to rain.
When using spraying accessories (e.g. paint spray guns), keep your distance from the unit during filling. Do not spray in the direction of the compressor!
RECOMMENDATION
Use a residual current device (RCD) with a tripping current of 30 mA or less.
If the mains lead of this device is damaged, it must be replaced with a special connecting lead available from the manufacturer or its after-sales service.
Observe accident prevention regulations. In addition to the information in this manual, the general safety and accident prevention regulations of the local
authorities must be adhered to.
The manual must be kept in the immediate vicinity of the compressor at all times and must be available to the operating personnel.
WARNING!
The compressor must not be used in a potentially explosive atmosphere. Fireplaces, open lights or sparking machines must not be present or operated.
Do not eat, drink or smoke in areas where work is being done.
Use only in well-ventilated areas or provide local exhaust ventilation.
There is no protection against water, i.e. the device must not be used in damp or wet spaces or in the rain, or in spaces where there is paint and/or dust mist.
Make sure that the device does not come into contact with water or moisture during operation or storage. Short-term outdoor use of the compressor in dry
ambient conditions is permissible. This compressor must NOT be used to suck in flammable gases ε
Avoid contact with hot parts. Do not touch any hot parts on the device. Note that various components may store heat and thus still cause burns even after
the device has been used.
Move the device only with the help of the transport handle provided.
and/or paint and dust mists.
x
GB/IE/NI/CY/MT
9
