Changing The Preload Of The Shock; Changing The Shock Spring - SHERCO 125 SE/R Manual De Propietario

CHANGING THE PRELOAD OF THE SHOCK

CHANGING THE SHOCK SPRING

Remove and clean the rear shock unit (
Select and install a spring based on your weight.
Spring Rate
Rider Weight (with equipment) : 65-75kg
Rider Weight (with equipment) : 75-85kg
Rider Weight (with equipment) : 85-95kg
Reinstall the shock.
Adjust the sag ( p.104)
☛
Adjust the static deflection (
Remove and clean the rear shock unit (
Loosen the collar
1
Loosen / tighten the red plastic ring
depending on the length required..
2
Indications
Tighten the collar
Reinstall the shock (
Recheck the settings (
p.115)
☛
p.104)
☛
.
1
Loosening Decreases the over-
one turn all length by 3mm.
Tightening Increases the overall
one turn length by 3mm.
(tightening torque: 5 Nm).
1
p.118)
☛
p.104)
☛
42N/mm
45N/mm
48N/mm
p.117).
☛
2
105