Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Adjusting the height of the unit
8.5
The working height of the control panel can be changed within the range of 200 mm. Grip the control panel (preferably
while standing behind it) from the sides with both hands, while pressing (and holding) with a finger the button located on
the bottom side of the panel, thus unblocking the mechanism of height adjustment. Re-position the panel gripped in the
described way to the desired working height. Block the panel in the set height by releasing the mechanism button.
When moving the cart, ensure that the connection cable of the foot controller or any other object does not get in
touch with the wheels of the cart.
Completion of work
8.6
The following is important:
•
turn off the main switch – position 0
Thus disconnecting the supply of electric power, water and air and the whole unit is depressurized
•
turn off /close/ the main supply of water (at the work place) to the dental unit
•
turn off the compressor – open the sludge valve
UM_EN_TYGI350B_2018-09_ver1.0
TYGI 350 B
42 / 49
Capítulos
