Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Note
After the turbine has been returned to the holder, the light goes off. Always return the micromotor or turbine to
the holder only after the completion of activity (foot controller level (pedal) in the basic position).
Used oil is collected in a receptacle – see the illustration below. If the oil exceeds the marked maximum value,
the receptacle should be turned in the direction of the arrow and emptied. The filter should be replaced if contaminated.
Retraction of procedural water
Upon the termination of use of dental instrument (after release of the foot controller pedal/lever),
dental unit software automatically performs blowing of instrument head (micromotor, turbine) using cooling air
of the instrument in a duration of 0.5 seconds.
UM_EN_TYGI350B_2018-09_ver1.0
TYGI 350 B
26 / 49
Capítulos
