Operation Of Individual Instruments Of Control Panel; Syringe; Turbine - Tecno-gaz KYRI CART Instrucciones De Uso

INSTRUCTIONS FOR USE
8.1.4

Operation of individual instruments of control panel

In addition to mentioned below, it is necessary to follow the instructions of the manufacturers of the instruments assembled
with the dental unit.
8.1.5

Syringe

It is ready to operate already in the holder:
•
For air blowing, press the right lever
•
for water rinsing, press the left lever and
•
to create water mist (spray), press both levers simultaneously
8.1.6

Turbine

24.AUG
> 10%
DR.SMITH
After the instrument has been taken the data on its setting is displayed. Its meaning is as follows:
Instrument type
If the bargraph is inactive, it displays the type of the instrument being used.
Bargraph in active condition displays graphically an informative value of the main parameter (power output).
Buttons of the fast pre-selection of the turbine output
Press the respective button to change the setting of the output to the said value. The data is not saved
automatically into the program memory. The buttons are active only if the mode of output control is enabled.
Button for setting the turbine output
Press the button to start the setting mode in which the buttons whose values can be changed are displayed
in red. Change the parameter value by means of the buttons +/- . The new value is saved temporarily (until
the change of the program number) by pressing the button of the parameter being set again or permanently
into the program by means of the button
The new value can be entered also directly via numerical keyboard after pressing the button
The button is active only if the output control mode is enabled.
Button for the selection of a program.
Press the button to display a pop-up menu with program options.
Press the respective button to select the desired program or cancel selecting a program by means of the button ESC
To save all changed and unsaved parameters of instrument settings to program memory, just keep the button pressed
for a longer time (approximately 2 seconds)
The save is indicated by changed color of the icon (to red) and by sound signal (2 short beeps).
UM_EN_TYGI350B_2018-09_ver1.0
12:12
TURBINE
> 50%
PROGRAM 1
P1
.
100
> 100%
33%
TYGI 350 B
%
TYGI 350 B
.
23 / 49