KitchenAid 720-0787 Instrucciones De Instalación Y Manual De Uso Y Cuidado página 11

INSTALLATION INSTRUCTIONS
Swivel Caster Assembly
Excessive Weig ht Haza_
Use two or _re people to move and install gflii.
Failure to do so can result in back or ot_r injury.
1. Unpack bottom panel and 4 casters. Remove 16 screws
pre-assembled on the bottom panel and use those screws to
secure the four casters. Two casters (H) should assemble on
the line of left side, swivel caster (I) assemble on the front right
side, swivel caster with brake (J) assemble on the rear right
side as shown below.
Hardware
that follow.
REF#
1
2
3
contents pre-installed as noted in instructions
Description QTY
1/4"12mm Truss Head Screw 34pcs
1/4"8mm Truss Head Screw 4pcs
5/32"10mm Countersunk Head 4pcs
screw
4 5/32"10mm Truss Head Screw 6pcs
5 1/4"10mm Stage Screw 8pcs
H
I
1 2 3 4 5
Preparation
Before beginning assembly, make sure all parts are present.
Compare parts with package contents list and diagram above.
If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacements parts.
• Estimated Assembly Time: 20 minutes
• Note: The right and left sides of the grill are designated as if
you are facing the front of the grill.
Cart Assembly
1. Unpack the left side panel (B), right side panel (C) and rear
panel (D). Loosen 8 screws which are pre-assembled on the
bottom panel and 6 pre-assembled screws on the left and
right side panels.
2. Secure the left side panel (B) by clipping the open hole
onto the screws which is pre-assembled to the bottom
panel and tighten the 3 screws.
B
11