Safety Devices; Transport; Installation; Installation Place - Nussbaum TTC 600 Manual De Instrucciones

(1*/,6+ ‡ ,QVWUXFWLRQV PDQXDO
The TTC 600 tyre changer has a number of safety devices designed to guarantee the utmost operator
safety:
1. Check valve on the spindle opening hydraulic line (inside the swivel connector, see fig. B/1).
This prevents the wheel from falling from the spindle if the hydraulic line is accidentally broken.
2. Pilot operated dual seal check valve (see Fig. B/2).
This prevents the spindle carrier arm from dropping if the hydraulic circuit accidentally breaks.
3. Pump motor overload cut-out (inside the electric enclosure).
This cuts in if the motor overheats to prevent it from burning out.
4. Mechanical tool arm tip lock device (See Fig. B/3).
Prevents the arm from being moved to its "non-working position" if the tool has been removed.
CAUTION: Removing or tampering with the safety devices is in violation of
European safety regulations and releases the manufacturer from all liability
for damage caused by or related to such actions.
The machine is delivered in a wooden box with pallet.
Shipping weight is 640 kg.
The machine must be handled with a fork-lift truck with the forks positioned as shown in the figure
A/2.
Choose the place the machine is to be installed in compliance with current work place safety regulations.
The floor should not be broken or uneven so that the machine will be stable.
If the installation is outdoors, it must be protected by some kind of roofing against rain.
The following work environment conditions are applicable:
Relative humidity: from 30-95% without condensation;
Temperature: from 0-55° C.
WARNING!
The machine must not be operated in explosive environments.

4. SAFETY DEVICES

5. TRANSPORT

6. INSTALLATION

6.1 INSTALLATION PLACE

31
B/1
B/2
B/3
A/2
TTC 600