HoMedics BPM83 Manual Del Usuario página 7

MEASUREMENT OF PULSE RATE AND BLOOD PRESSURE
To set the user and memory zone, proceed as follows:
While in power off mode, press the "SET" key to select user. Confirm your selection with the Power key to turn the
power on and start to measure your blood pressure. Or wait for 3 seconds, your selection is then stored and shut off
automatically.
1. Press the Power key to turn the power on. After full display is shown, the values for the last reading will appear
on the display. If there is no measurement, the unit displays the value "0".
2. After the self-test, the blood pressure monitor starts to measure. The cuff will automatically begin to inflate, with
the display showing the increasing pressure in the cuff.
3. As the pressure increases, the indicator will increase upwards according to the pressure value on the display.
4. As the cuff inflates, the monitor automatically determines your ideal inflation level. This monitor detects your
blood pressure and pulse rate during inflation.
5. To detect the heartbeat, the heartbeat symbol will appear and continuous flashes on the LCD display.
6. Your blood pressure measurement and pulse will display simultaneously on the screen.
7. The Hypertension Indicator will indicate your reading range on the display separately.
8. Press the Power key to turn the unit off and conserve energy and battery life.
The unit will automatically shut-off approximately 2 minutes.
Press
SET Key
7 I EN