Operating Instructions - Stihl BR 350 Manual De Instrucciones

English
Shut off the engine.
BR 350
BR 430
Move the setting lever in the
N
direction of † – the engine stops –
the setting lever springs back to the
on position.
Other hints on starting
Engine stalls in cold start position c
or under acceleration
Move the choke knob to o and
N
continue cranking until the engine
runs.
Engine does not start in warm start
position o
Move the choke knob to c and
N
continue cranking until the engine
runs.
18
If the engine does not start
Check that all settings are correct.
N
Check that there is fuel in the tank
N
and refuel if necessary.
Check that the spark plug boot is
N
properly connected.
Repeat the starting procedure.
N
Fuel tank run until completely dry
After refueling, press the fuel pump
N
bulb at least eight times – even if the
bulb is filled with fuel.
Set the choke knob according to
N
engine temperature.
Start the engine.
N

Operating Instructions

During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Empty the fuel tank
and keep the machine in a dry place,
well away from sources of ignition, until
you need it again. For longer out-of-
service periods – see "Storing the
Machine".
BR 350, BR 430