Stihl BR 350 Manual De Instrucciones página 14

English
2
5
6
7
Push the hose clamp (5) onto the
N
pleated hose (2).
Line up the hose clamp (5) and
N
blower tube (6) – as shown.
Secure the hose clamp (5) with the
N
screw (7).
Mounting the nozzle
3
2
Push the nozzle (1) onto the blower
N
tube (2) and engage it on the
lugs (3).
12
Removing the nozzle
2
Rotate the nozzle (1) in the direction
N
of the arrow until the lugs (3) are
covered.
Pull the nozzle (1) off the blower
N
tube (2).
Adjusting the control handle
Put the machine on your back and
N
adjust the harness – see "Fitting the
Harness".
1
Move the control handle (1) along
N
the blower tube (2) to the most
comfortable position.
Secure the control handle (1) with
N
the screw (3).
1
3
1
2
3
Engage the throttle cable (4) with
N
sleeve (5) in the retainer (6).
Wear mark on nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. Replace the nozzle when it
has worn as far as the wear mark.
Fitting the transport aid
When storing or transporting the
machine:
BR 350, BR 430